SITE SEGURO

SEUS DADOS ESTÃO PROTEGIDOS

ENTREGA GARANTIDA

VOCÊ ESTÁ EM UM AMBIENTE 100% TRANSPARENTE

PAYPAL

VOCÊ TEM SEGURANÇA PARA COMPRAR

BOLETO BANCÁRIO

UTILIZE BOLETO OU DEPÓSITO BANCÁRIO PARA GARANTIR O MELHOR PREÇO

>
POR: 1.599,99

ou 12x de R$ 153,42 com juros

COMPRAR
 
 

Water Blocks

GPU Water Blocks

Water Block+Back Plate EK Vector RGB 2080/Ti

Water Block+Back Plate EK Vector RGB 2080/Ti

MARCA::  EK  | 

MODELO::  Vector RGB

GARANTIA:: 6 Meses + Garantia Do Fabricante  | 

DISPONIBILIDADE PARA ENVIO:: De 18 a 30 Dias Úteis

mais informações

Water Block+Back Plate EK Vector RGB 2080/Ti

MARCA::  EK  | 

MODELO::  Vector RGB

GARANTIA:: 6 Meses + Garantia Do Fabricante  | 

DISPONIBILIDADE PARA ENVIO:: De 18 a 30 Dias Úteis

mais informações

Modelo?

2080 Acetal + Nickel

2080 Nickel + Plexi

2080 Ti Acetal + Nickel

2080 Ti Nickel + Plexi

As combinações acima não possuem estoque.

por: R$ 1.599,99

ou por 12x de R$ 153,42 com juros

Quantidade

+

-

COMPRAR

Ver outras formas de pagamento e parcelamento

Frete e prazo

Frete e prazo

calcular

Não sei meu cep

PRODUTOS RELACIONADOS

Descrição do Produto

Details

The EK-Vector high-performance water block is specially designed for multiple NVIDIA® GeForce® RTX Turing based graphics cards. The water block itself uses the signature EK® single slot slim look, and it covers the entire PCB length. This sophisticated cooling solution will transform your beefy graphics card into a minimalistic, elegant piece of hardware. The block also features a unique aesthetic cover over the block Terminal which is designed to reveal the graphics card model, visible from the side.

This water block is compatible with all reference design GeForce RTX 20x0 based graphics cards, but as always, we recommend that you refer to the EK® Cooling Configurator for a precise compatibility match. 

EK-Vector RTX 2080

The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks. 

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. 

RGB compatibility

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-Rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. The front aesthetic corner piece is lit up with LED strip and can be easily removed to replace the LED strip with your preferred solution.This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. 

EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section.

G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of GPU Terminals. The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.

The NVIDIA® NVLink is compatible with this water block. 

Enclosed:

- EK-Vector series high-performance water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x Nickel plated brass plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

PLEASE NOTE:

  • Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • NVIDIA® RTX 2080Ti Founders edition factory backplate is not compatible with this water block!
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • Fittings are just for showcase and are not included!
  • The EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Chip Manufacturer Nvidia GeForce

Comentários